A pilot light that will not stay lit usually means a worn thermocouple, a dirty pilot orifice or a draft pulling the flame off the sensor. Standing pilots are found on older furnaces; newer ones use electronic ignition. If you smell gas, leave and call the gas utility. Otherwise call (208) 683-7054 with the furnace brand and age.
Why a pilot goes out
- Thermocouple wearing out and no longer holding the gas valve open.
- Clogged pilot orifice giving a weak or yellow flame.
- Drafts at the furnace closet or venting changes.
- Gas supply or valve problems.
What we check first
- Pilot flame color and size.
- Thermocouple millivolt output.
- Pilot orifice and gas pressure.
- Venting and draft at the cabinet.
- Whether upgrading to electronic ignition makes sense.
Safe relighting
Follow the label on the furnace exactly, only when there is no gas smell. Repeated failures need a technician. A weak pilot can allow unburned gas or incomplete combustion; see the [US EPA carbon monoxide guidance](https://www.epa.gov/indoor-air-quality-iaq/carbon-monoxides-impact-indoor-air-quality). For hot-surface igniters see furnace ignition repair.
Technician insight
In Boise 83709 the thing that catches most people out with furnace pilot light problems is the way wind-driven cold air sneaks under 1970s ranch homes and cools the pilot area just enough to trip the thermocouple on the first cold snap of the season.
Persistent Pilot Outage After Windy Night
A 83709 homeowner reported the pilot going out every morning. Inspection showed the thermocouple tip was barely engulfed due to a slightly bent bracket from an earlier filter change. We straightened the bracket, replaced the thermocouple, and verified the flame covered the sensor tip completely. The furnace held through the next cold front without further issues.
Furnace Pilot Light Problems Services We Offer
✓Thermocouple Replacement
Replaces worn thermocouples that drop out the pilot.
✓Pilot Assembly Cleaning
Clears the orifice and restores a blue, steady flame.
✓Draft and Venting Check
Looks for drafts and vent issues that disturb the flame.
✓Electronic Ignition Options
Explains whether converting an old standing pilot is worthwhile.
Furnace Pilot Light Problems Cost in Boise, ID
| Service | Typical Range | What Affects It |
|---|---|---|
| Pilot Orifice Cleaning | $120–$220 | Price rises if tubing must be replaced. |
| Thermocouple Replacement | $180–$350 | Depends on furnace model and access in crawl space. |
| Full Pilot Assembly Service | $250–$450 | Includes parts and labor for older units common in 83709. |
Ranges are typical for Boise, ID and confirmed with an exact written quote before any work starts.
How it works
- 1
Gas safety check
Confirm there is no gas odor before relighting.
- 2
Inspect the pilot
Check flame shape and thermocouple output.
- 3
Repair the assembly
Clean or replace the thermocouple, orifice or valve.
- 4
Test the cycle
Relight and run the furnace through a full cycle.
Pricing
Costs depend on the part and furnace model; the price is explained after inspection and before work starts.
